Designed & manufactured in the MidlandsFree delivery on 3+ racks

Fixings & application

Designed for the wall.
Fitted with care.

Vinwall is a wall-mounted product, so the fixing route is part of the product experience — not a small-print afterthought.

Application first

Start with
the wall.

A fixing template and installation instructions are supplied with every wine rack, and all models have four fixing points. The appropriate wall fixings depend on the wall substrate. Follow the supplied instructions, and use a qualified installer where the wall condition, load or suitability is uncertain.

Wall construction

Know the substrate.

Tell us whether the wall is plasterboard/stud, masonry, timber/joinery, tile/stone finished or something less typical. If you are unsure, tell us in the planner or your enquiry and we will advise.

Fixing route

Use the approved method.

The fixing system must match your wall and the Vinwall rack you have chosen. There is no one-size-fits-all fixing, so follow the supplied instructions and choose fixings suited to the substrate and the full loaded weight.

Installation support

DIY or professional?

The project planner already records whether you expect to self-install, have your own installer or need advice, so the enquiry reaches the team with the right context.

Suggested fixing for solid brick

For solid brick, consider suitable pan-head or round-head screws and compatible masonry wall plugs. The following are examples to help you select appropriate components for your wall.

Compatibility matters: Choose screws that match the wall plug, substrate and rack thickness. The Fischer 8 × 65 mm plug is not automatically suitable for either example screw length. Consult Fischer’s sizing guidance and the supplied Vinwall fitting instructions before installation.

Weight & wall fixing

Plan for a
full display.

Every rack has four fixing points. When selecting wall fixings, consider the combined weight of the empty rack and all full bottles, not just the rack itself.

Standard / 6 bottles

525 g rack · 1.0 mm steel

Six full standard wine bottles: approximately 7.2–9.0 kg. Combined with the rack: approximately 7.7–9.5 kg.

Standard / 8 bottles

735 g rack · 1.0 mm steel

Eight full standard wine bottles: approximately 9.6–12.0 kg. Combined with the rack: approximately 10.3–12.7 kg.

Champagne & sparkling / 6 bottles

700 g rack · 1.2 mm steel

Six full sparkling wine bottles at approximately 1.6 kg each: around 9.6 kg of bottles. Combined with the rack: approximately 10.3 kg.

Typical full 750 ml wine bottles weigh around 1.2–1.5 kg, including approximately 750 g of wine and the glass bottle. Sparkling-wine bottles often have heavier glass. These are indicative weights, not certified wall, rack or fixing load ratings. Choose a suitable fixing method for the substrate and intended load, and consult a qualified installer where needed.

Bullfix demonstration

See the fixing
in application.

Watch the Bullfix demonstration below to see the fixing system in application.

This demonstration is provided as an introduction to the Bullfix system. Follow the Vinwall fitting instructions and select fixings suitable for the wall and rack.

Fitting flow

Six clear
stages.

Follow these six overview stages alongside the supplied fitting instructions.

01

Assess

Check the wall material, condition and intended position before you begin.

02

Prepare

Use the supplied template to mark the four fixing points.

03

Fix

Drill the marked points and prepare the wall fixings specified for your wall type.

04

Mount

Secure the rack vertically using the supplied fitting instructions and suitable hardware.

05

Check

Check the rack is level and secure before loading.

06

Load

Place bottles carefully into the alternating side supports, within the confirmed capacity.

Important

Do not use this page as a technical installation manual. The weights and fixings shown here are indicative, not certified ratings. Follow the instructions supplied with your rack, choose fixings to suit your wall and the full loaded weight, and use a qualified installer where needed.

Need installation help?

Bring the wall
into the enquiry.

Use the Wall Planner to send the wall material, approximate dimensions, project type and intended installation approach with your enquiry.

Open Wall Planner
Plan my wallRequest quote